Products from Bow Jax

Revelations Crossbow Kit includes (2) Limb dampeners designed for split limb bows and (2) Stirrup dampeners. X-shaped dampener wedges snugly between the limbs without the use of screws or adhesives...

Limb dampeners designed for split limb bows. X-shaped dampener wedges snugly between the limbs without the use of screws or adhesives. 11/16” size fits Hoyt and newer BowTech with split limbs. 15/16”...

Soft polymer material dampens limb vibration and noise. Install easily with the provided screws without a bowpress.

This kit contains a pair of split limb Monsterjax, four Crossbow Slipjax string silencers, one retention bolt dampener and two 1012b stirrup dampeners.

Softer polymer material has a higher tensile strength the provides extra noise dampening and vibration reduction. Slides over cable guard and acts as a cable slide stop.

BOWJAX MACDADDY STOPPER

Stabilizer features noise and vibration reducing material to quiet even the noisiest bow with a multi-tiered assembly. System includes five alternating x's to suck up bow vibration and dissipate them...

Slide snuggly over any manufacture's crossbow bolt retention spring to dampen any twang or vibration noise that is produced when firing your crossbow. No glue or any type of adhesive needed. Won't...

Fits on compound bows with 1/2" cut-out holes in the riser. They screw together and fit most machined aluminum risers. Comes with large rubber washers to cushion the grip and provide an extra measure...

Crossbow MacDaddy Sting Suppressors feature a soft polymer molded over the top of a durable inner stopper. Simply slide them over existing rods, no glue or adhesive needed. Fit 3/8” rods. This...

Strategically places weight on your bowstring to gain velocity. Can be used with or without string silencers. Eliminates the need for speed buttons. Silences while improving speed. Installs by...

Solid limb dampener created for slim limb compound and recurve bows, the base of the limb dampener is 15/16" and adheres by a strong double stick tape provided. (2-pk) 142.7grs.

4-arm dampener helps dampen noise and vibration for your stabilizer. The only stabilizer module designed that has 4 arms with balls at the end for maximum stability and control. 5/16" x 24 thread,...

Cable guard dampener designed not to interfere with your sight window. Can be placed in front of the cable slide to act as cable guard stop. Width: 1”.

Ultrajax II string silencers reduce noise and vibration by surrounding the string with dampening material. Bow does not lose velocity. Testing shows a usual increase of 1-3 FPS. Weight: 19 grains.

Crossbow Slipjax fit in between string strands. Dimples retain the silencer in the string. Thick string silencers made of durable polymer. Weigh 23 grains each. 4 pack.

This kit contains a pair of split limb Monsterjax, four Crossbow Slipjax string silencers and one retention bolt dampener.

Split Limb Dampeners install easily without the use of a bowpress. Dampeners fit limb gaps on split limb crossbows from 3/8" to 1 1/8" and lock into position with the provided screws. The retention...

Dampeners can be installed on a stabilizer to reduce vibration. Fits stabilizers with 5/8” -1” outside diameter. 2/pk.

The solid limb MonsterJax features a patented design. The new monster jax works by utilizing 6 arms that vibrate at different frequencies to dampen noise and vibration. This version of monsterjax are...