Products from Bow Jax

Installs in seconds and easily slips over the end of the stabilizer. Improves accuracy and reduces vibration. Fits stabilizers with 3/4? outside diameter.

Solid limb dampener created for slim limb compound and recurve bows, the base of the limb dampener is 15/16" and adheres by a strong double stick tape provided. (2-pk) 142.7grs.

Cable guard dampener designed not to interfere with your sight window. Can be placed in front of the cable slide to act as cable guard stop. Width: 1”.

String type silencer quiets and deadens string oscillation during the shot. Slides between string strands for easy installation.

Slimmer guide rod dampener with arms that don't span out over 1" in width and don't interfere in your sight view, easily slips over cable guide rod, can be placed in front of the cable slide and acts...

Strategically places weight on your bowstring to gain velocity. Can be used with or without string silencers. Eliminates the need for speed buttons. Silences while improving speed. Installs by...

All new softer polymer material with a higher tensile strength dampens limb vibration and noise up to 80%. Flexible arms touch against the bow limbs drawing vibration and noise away from the shot.

Ultrajax II string silencers reduce noise and vibration by surrounding the string with dampening material. Bow does not lose velocity. Testing shows a usual increase of 1-3 FPS. Weight: 19 grains.

Fits on compound bows with 1/2" cut-out holes in the riser. They screw together and fit most machined aluminum risers. Comes with large rubber washers to cushion the grip and provide an extra measure...

Limb dampeners designed for split limb bows. X-shaped dampener wedges snugly between the limbs without the use of screws or adhesives. 11/16” size fits Hoyt and newer BowTech with split limbs. 15/16”...

Soft polymer material dampens limb vibration and noise. Install easily with the provided screws without a bowpress.

Limb silencer helps quiet bow noise and jump during the shot. New design features six vibration eating arms for even more repeatable accuracy.

Can be used with or without string silencers. Eliminates the need for speed buttons. Silences while improving speed. Installs by slipping over the string(bow press required). Weigh 16 grains each. 4...

Reduces noise and extends the life of bow limbs. Thick rubber pads attach to limbs with provided screws without the need for a bow press. Measurement indicates limb gap distance.

Ultrajax 1 string silencers do not require a bow press. Long-lasting silencers are slit down the center so you can easily wrap serving string or the provided zip ties to fasten them in place. Can be...

The four dot stopper is made of a supper soft polymer that is very quiet and long lasting. Made to fit on all manufactures 3/8" cable guard rods. Uses a four dot system to align the string completely...