Products from Bohning

Hot melt Ferr-L-Tite softens under a flame. Especially good for inserting aluminum broadhead adapters and target points. Reheating will allow point to be removed at later date.

Low-temp hot melt for carbon shafts, instant full strength set-up in cold water, super strong, easy to apply, heat reversible, 12 gram stick will do approximately 144 inserts.

Bohning's Multi-Fletcher Jig includes 7 color-coded clamp inserts for different angles, from straight up to a 3 degree right or left helical. It works with all arrow diameters from X10s to 27s. The...

Tower fletching jig allows you to fletch all three vanes at once. Includes 7 sets of arms - Straight (Up to 4” vane), 1 degree offset (Up to 4” vane), 3 degree right helical (Up to 2.25” vanes), 1...

Fletch-Lac for aluminum, wood and fiberglass for dipping and cresting.

Heat reversible adhesive welds inserts and outserts to all shaft types, increased impact resistance, increased holding power and easier to apply, availble in 1oz bottle.

This arrow wrap and vane combo set lets you custom your arrows to your liking. The wraps are a standard 4" length and are 1.125" wide and contains 13 wraps. Also included are 36 True Color Blazer...

Arrow dipping kit includes (1) glass dip tube with Dip’n Plug ring, (1) arrow hanger, (2) pints of white Acry-Lac, and (2) pints of clear Acry-Lac. Included dip tube can hold up to 4 arrows at a time...

Teflon laminated tapes to be applied to fletching clamps to prevent adhesives from adhering to clamps. Silver.

Fletch Fuse is designed for use with vanes, feathers and nocks. It has a clamp time of 30 seconds and a cure time of 2 minutes. Comes in a 1/2 oz. bottle.

The Cauldron Jig is a 3 vane advanced fletching system. It provides the right amount of pressure for excellent adhesion, and you can fletch all three vanes at once so it's a big time-saver. The...

Shaft stripper features a contoured surgical steel blade for years of use, pre-formed channel to keep shaft properly positioned, and an easy-grip handle.

Clear bottle with applicator tip designed to hold 2 oz. of solvent or adhesive. Comes with red cap for air tight seal.

The Griffin Vane is designed specifically for olympic recurve archers. The twisted ribbon design aids in immediate arrow rotation and the minimal surface area resulting from the cut-out profile...

Fletching jig features a Quick-set magnetic clamp with larger clamp grips for easier operation, easy off-set adjustment, and accurate "snap" indexing.

Use less glue for maximum adhesion with the fastest cure time. Instant glue for fletching vanes, feathers and nocks, clamp time is 15 seconds with full cure in only 2 hours.

Designed for maximum accuracy and durability with minimal noise. Chemically treated base promotes adhesion with no prep needed. Length: 4”, Height: 0.5”, Weight: 12 gr.

Bohning X3 Vanes feature a shield cut ultra-stiff lower profile design. Designed for field and FITA archery. Lightweight for added spped and constructed of Heat Vane material. Weight: 4.4 gr. (1.75...

Replacement clamps for the Bohning Fletching Jig

Low profile vane designed for field archery. Great for long distance shooting with lighter arrows. Features the same ultra-low profile as the Ice vane, but with a cut similar to the X Vane. Made with...