Bow Shop Tools

100 percent polyester similar to Dacron but with better durability and very low stretch. Primarily used for recurves, but also used on older compound bows with teardrops, and traditional bows without...

The BCY 452Xtra Bowstring Material is an advanced blend of 67% Dyneema and 33% Vectran, featuring a patented construction for superior performance. The new, high-abrasion-resistant Vectran reduces...

A hand held digital scale with an Aluminum outer shell. 110 pound capacity. It features a ”letoff percentage” reading for compound bows.

Digital archery scale designed to weigh in grains only. Includes arrow retainer. Measures with +-0.2 grain accuracy.

The Limb Lock Kit is a perfect addition to any LCA bow press and is designed specifically for pressing beyond parallel limb bows. The Limb Locks are foam-covered rollers that act as a safety to hold...

The Last Chance Archery Draw Board 2.0 is an advanced tool designed for precision tuning and setup of compound bows. Featuring a custom-designed winch and clutch system, it includes a heavy-duty...

The Limb Lock Kit is a perfect addition to any LCA bow press and is designed specifically for pressing beyond parallel limb bows. The Limb Locks are foam-covered rollers that act as a safety to hold...

100 percent braided Spectra serving material that is super strong and grips well. Suitable for end servings or center servings.

Made from 0.75? wide aluminum, these adjustable fingers match limb angles to prevent added stress. Featuring 1? wide custom fingertips, they fit all versions of Mathews ?Limb Support Caps? for safe...

The original high strength Dyneema bowstring made of 100% SK75. This material is very durable with low creep. BCY recommends 14-16 strands. This product is used for crossbows, compounds, recurves and...

A blend of tightly braided spectra and nylon yarn. Tough and durable material with a resin coating. Can be used for end servings (.018), center servings (.021/.025), or crossbow center servings (...

Ideal for the home or pro shop, this 10K RPM saw with micro-blade arrow saw makes precision cuts while collecting shavings and dust while cutting all types of arrows including, carbon, aluminum and...

The Pro Shop Bow Scale has dual purposes as a bow and big game scale. Features a stainless steel carabiner with spring gate, S hook and LED illuminated display. Calculates peak weight and holding...

This kit includes upgraded 3” wide blocks for your LCA bow press. Install these blocks onto any LCA press that is copper in color. By upgrading, you'd remove the narrow 2.5” blocks and install wider...

Dual sided L Frame shape provides superior torque. Handles are over-molded with soft touch rubber for extra comfort. Size indicators are marked on tops of wrenches for easy identification. Set...

A hand hanging digital scale with 200 pound capacity. Adaptable to a draw board. It features a ”letoff percentage” reading for compound bows.

The Last Chance Archery Draw Board 2.0 is an advanced tool designed for precision tuning and setup of compound bows. Featuring a custom-designed winch and clutch system, it includes a heavy-duty...

The Last Chance Square Up is a top-tier high-precision squaring device and arrow spinner tool, designed to enhance the accuracy of arrow assembly. It features an adjustable diamond squaring insert,...

Smallest diameter available from three-ply twisted Dyneema material. Highly recommended for end servings. Servings should be tight but flexible.

Freehand Bow and Arrow Level kit. Includes Freehand Bow Level and Freehand Arrow Level.

Revamped and sporting new features the Tru-Center LAT (Laser Alignment Tool) includes tighter manufacturing tolerances to ensure precision measurements while using the 360 rotating laser. Now...

The 30-06 Digital Hand Held Bow Scale is a compact, reliable tool for archers to precisely measure bow weight. Featuring a sleek stainless steel and ABS design, this digital scale can measure weights...

Aluminum shaft marked every 1/2" from 22" to 34" used to measure draw length and arrow length.

The vise has a mounting clamp that will spread to 2 3/8? so it can mount to most benches, tables, or an LCA bow press. Included standard with the Revolution Vise would be the Multi-Axis Head and two...

Carbon arrow spine tester allows you to sort arrows for perfect consistency of spine, precisely index arrow nocks to the stiffest portion of the arrow shaft, check the concentricity of your broadhead...

Nock point and peep tying thread constructed of 100 percent high tenacity nylon, bonded to improve abrasion resistance. Will not fray when cut. High strength and weather resistant.

A blend of tightly braided spectra and nylon yarn. Tough and durable material with a resin coating. Can be used for end servings (.018), center servings (.021/.025), or crossbow center servings (...

A blend of tightly braided spectra and nylon yarn. Tough and durable material with a resin coating. Can be used for end servings (.018), center servings (.021/.025), or crossbow center servings (...

Dual jaw pliers can be used for installing nock sets as well as d-loops.

This kit includes upgraded 3” wide pins for your LCA bow press. Install these pins onto any LCA green or Pack-N-Go bow press model. When upgrading, you'll use an included pin pusher to remove the...

This arrow build kit contains the essential tools for arrow preparation and maintenance. Outfitted inside the Tech Tool Bag are some of OMP?s arrow care products for home prepping of all skill levels...

The OMP Cinch D Loop Plier makes tying D loops of any size easy. Designed with two notches; one for smaller pin nocks and one for regular-sized nocks. The spring-loaded handle makes this tool...